Philips QS6160 Instruction Manual page 36

English
occur. Replace a damaged shaving head before
you use it again (see chapter 'Replacement').
Hold the appliance in the shaving
1
position, with the shaving head pointing
upwards and the trimming head pointing
downwards (Fig. 15).
Press the shaving head on/off button once to
2
switch on the shaving head (Fig. 16).
QS6160 only: The on/off button lights up to
,
indicate that the shaving head is operating.
Place the shaving head on the skin and move
3
the appliance against the direction of hair
growth while you press it lightly (Fig. 17).
Tip
- Make sure that the shaving head is in full
contact with the skin.
- You can switch on the shaving head while the
trimming head is operating. If you do this, the
trimming head is switched off immediately.
To switch off the shaving head after use, press
4
the shaving head on/off button again (Fig. 16).