Setup > Logs; Setup > Alarms - Navman Tracker 5505 Installation And Operation Manual

Navman tracker installation and operation manual 5505, 5605
Table of Contents

Advertisement

14-6 Setup > Logs
Press
one or more times until the
Setup menu is displayed, then select Logs:
14-7 Setup > Alarms
Press
one or more times until the
Setup menu is displayed, then select
Alarms:
All alarms except Loss of GPS fix can be
turned on (enabled) or off (disabled).
Symbol
Alarm
Arrival
radius
Anchor alarm
XTE
Danger
Low fuel
Loss of
DGPS fix
Loss of
GPS fix
TRACKER 5505/5505i/5605 Installation and Operation Manual
www.Busse-Yachtshop.de
The values can be changed independently of
each other. These log values are saved when
the unit is turned off.
Reset trip dist
This resets the trip distance to zero.
Reset total dist
This option resets the total distance to zero.
Reset engine hours
Use this option to reset the engine hours
to zero. This can be useful after an engine
service or to count the engine hours between
service intervals.
For the XTE and Loss of DGPS fix
alarms, select
enter a trigger value to turn the alarm on. The
alarm will sound each time the alarm value
equals the trigger value. For example, the
Danger alarm will sound if the boat comes
closer to a danger waypoint than the trigger
value and the Anchor alarm will sound if the
boat moves by more than the trigger value. To
turn these alarms off, enter a trigger value of
0 (zero).
Icons for alarms that are on can be displayed in
the data header (see section 2-8-2). An alarm
icon is normally black and turns red when the
alarm sounds.
Alarm sounds when it is on and the:
boat is closer to the destination or to a waypoint
than the alarm trigger value
boat moves by more than the alarm trigger value
boat moves off course by more than the CDI scale
(see section 14-2)
boat comes closer to a danger waypoint than
the alarm trigger value
Low fuel fuel remaining equals the alarm trigger value; on a multi-tank
boat you can set separate alarms for each tank (see section 10-4)
TRACKER can not receive the DGPS signal
(beacon, WAAS or EGNOS)
TRACKER can not receive the GPS signal
(this alarm is always on)
email: info@busse-yachtshop.de
to turn the alarm on or select
to turn the alarm off. For the other alarms,
NAVMAN
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracker 5605

Table of Contents