Installation: Power/Data Cable - Navman Tracker 5505 Installation And Operation Manual

15-4 Installation: Power/Data cable

The power/data cable has a black locking collar and flying leads.
1 Wire the TRACKER for auto power to have the TRACKER turn on with the boat's ignition switch or
to record engine hours or to record the total fuel used. Otherwise wire for basic power (for more
information, see section 2-2).
Basic power
Black
Auto power
During setup, set up Auto power off (see sections 2-2 turning on and off and 14-1 Setup system)
Black
2 Wire any external alarm beepers or
lights. The alarm output switches to
ground to sound the alarm. If the current
is more than 200 mA, fit a relay.
3 Connect the power/data cable to the
black display unit connector; turn the
collar to lock the connector.
TRACKER 5505/5505i/5605 Installation and Operation Manual
www.Busse-Yachtshop.de
Power/data cable
Red
Yellow
Black
Power/data cable
Yellow
Red
Black
email: info@busse-yachtshop.de
Fuse 2A
Fuses 2A
Black
NAVMAN
Main switch
12 /24V DC
Ignition
Ignition switch
Main switch
12/24 V DC
Power/data cable
Red
Green
External beepers or
lights
55