Technical Specifications; Specifiche Tecniche - Kind DQX 3024 User Manual

Table of Contents

Advertisement

DQX models Specifications
Power Output Per Channel 8
Bridged Mono Power 8
(EIA 1kHz - 1% THD both channels driven @ 230VAC)
Damping Factor @ 8
Input Sensitivity @ 4
Input Connectors (each channel)
Output Connectors (each channel)
Current Draw (230VAC) 1/8 power 4
In line with development policy specifications may change without future notice. We made our best to guarantee the information accuracy included on this publication, the
DQX 3024
280W
4
450W
2
750W
2x900W
4
2x1500W
20Hz - 20kHz, +0 / -1dB
Frequency Response
Distortion THD+N
<0.2% @ 0.5dB below rated power @ 4 , 1kHz; 0.4% @ 0.5dB below rated power @ 2 , 1kHz,
Distortion SMPTE-IM
<0.35% @ -3dB below rated power @ 8
10Hz to 200Hz
>500 @ 8
(32dB Setting)
1.07V
Voltage Gain
26dB (20x) or 32dB (40x) (internally set) 32dB is standard factory set
Input Impedance
10k
unbalanced, 20k
Hum and Noise
-100dB,A-weighted
Balanced: Neutrik Combo™ (XLR and 1/4" jack), XLR pin 2 and TRS tip positive, and 3-pin detachable Europlug
Neutrik Speakon™
Controls
Front: power switch, Ch.A, Ch.B, Ch.C, Ch.D stepped gain knobs
Rear: 4-position DIP switch
Active status, signal -35dB, level -20dB, level -10dB, clip/limiter, protect, hi-temperature, internal option module expansion
Led Indicators
Amplifier Protection
Full short circuit, open circuit, thermal, ultrasonic and RF, continuous non-musical signals, reactive or mismatched loads,
mains AC outside the operating voltage
On / off muting, clip limiter, DC-fault power supply shutdown
Load Protection
Circuitry
TeoTon™ digital patented technology
Power Supply
Regulated global power supply (95 - 265VAC) works anywhere in the world with PFC (Power Factor Correction)
Cooling
Continuously variable fans, front to rear air flow with front panel dust filter
Power Requirements
95 - 265VAC, 50-60Hz
2.0A
1/3 power 4
3.9A
at idle
0.5A
Options
DSP module for signal processing, WinARC™ Amplifier Remote Control by PC, dedicated and customized module for signal
filter and equalisation
Dimensions
483mm W x 88mm H x 455mm D
11.8 kg
Weight Net
Shipping
14.8 kg
Approvals
CE
EN55103-1 (Emissions), EN55103-2 (Immunity), EN60065, Class I (Safety)
DQX 4024
DQX 3044
350W
450W
600W
750W
1000W
-
2x1200W
2x1500W
2x2000W
-
1.23V
1.37V
balanced
2.5A
3.0A
5.0A
6.1A
0.5A
0.5A
Via Montello, 19 - I-28066 Galliate (NO) ITALY
Tel. +39 0321/865271 - Fax +39 0321/861674
A&AG S.r.l. doesn't undertake responsibility for mistakes or imprecisions.
V 1.2 © 2006 A&AG S.r.l.All rights reserved. Printed in Italy 03/06.
DQX 4044
DQX 4844
550W
700W
1000W
1200W
-
-
2x2000W
2x2400W
-
-
1.59V
1.74V
3.9A
4.5A
8.0A
9.5A
0.5A
0.5A
KIND is a trademark of
e-mail: info@kindaudio.com
www.kindaudio.com
DQX 6044
850W
1500W
-
2x3000W
-
1.95V
5.5A
11,7A
0.5A
A&AG S.r.l.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dqx 4024Dqx 3044Dqx 4044Dqx 4844Dqx 6044

Table of Contents