Technical Specifications; Specifiche Tecniche - Kind MCX 84 User Manual

Mcx series
Hide thumbs Also See for MCX 84:
Table of Contents

Advertisement

MCX models Specifications
Model
Number of channels
Power Output Per Channel 1)
16 ohms per ch. (all channels driven)
8 ohms per ch. (all channels driven)
4 ohms per ch. (all channels driven)
Power Output Bridged 1)
16 ohms per ch.
8 ohms per ch.
Performance
THD+N 20 Hz - 20kHz for 1 W @ 4 ohms
THD @ 1 kHz 1dB below clipping @ 4 ohms
Signal to Noise Ratio
Frequency Response (1 W @ 8 ohms) +0/-1dB
Damping Factor @ 8 ohms load, 10 Hz to 200 Hz
Output Slew rate @ 8 ohms (input fi lter bypassed)
Input Impedance Balanced / Unbalanced
Input CMRR
Gain and Level
Input Sensitivity @ 4 ohms +/- 3 %
Input Gain
Level Adjustment (per channel)
Front panel Indicators
Per channel
Connectors and switches
Input connectors (per channel)
Output connectors (per two channels)
Output bridge mode per two channels
Rear panel 4 position DIP switches per two channels
Internal 3 position DIP switches per channel
Power (on/off)
Output Circuitry / Design Topology
Power Supply
Cooling
Amplifi er and Load Protection
Power
Operating voltage (selectable inside the unit)
Current draw @ 230 V AC 1/8 power 4 ohms
Current draw @ 230 V AC 1/3 power 4 ohms
Current draw @ 230 V AC, idle
Soft start / Inrush current draw @230 V AC
AC cordset
Dimensions (W/H/D)
Weight - Net / Shipping
Approvals
Note 1) EIA 1kHz - 1% THD @ 230 V AC
All specifi cations are subject to change without notice.
In line with development policy specifications may change without future notice. We made our best to guarantee the information accuracy included on this publication, the
MCX 84
MCX 124
4
4
30 W
50 W
50 W
90 W
80 W
120 W
100 W
180 W
160 W
240 W
<0.05%
<0.05%
<0.1%
<0.1%
>106 dB
>106 dB
20Hz - 20kHz
20Hz - 20kHz
>200
>200
20V /uS
20V /uS
20k / 10kOhm
20k / 10kOhm
>50 dB
>50 dB
0.775 V
0.775 V
27.3 dB
29 dB
Front panel potentiometer, 21 pos. stepped gain from -80 to 0 dB
Active (unit power on); Signal output -30 dB; Clip / Limit;
Balanced: XLR/Female; pin 2 positive
4-pin detachable Europlug (Phoenix)
A+B - ch. A is signal input source and pot. A is level control
Ch. A / B Limiter on; Ch.'s A+B Link on, Stereo/Bridge on; Ch.'s B+C Link on
Full range on, Low Pass Filter on (100 Hz - 18 dB/oct), High Pass Filter on (100 Hz - 18 dB/oct)
Switch on front panel
I.C. Class AB
I.C. Class H
Linear power supply with toroidal transformer
Convection system
Short circuit, open circuit, thermal, RF protection. On/off muting, clip limiter
Nominal 115V AC (92-132V AC) - 50/60 Hz, min. power up voltage 85 V; or nominal 230V AC (184-264V AC) - 50/60 Hz, min. power up voltage 170 V
0.8 A
1.0 A
1.6 A
2.0 A
0.1 A
0.1 A
Yes / max. 2 A
230 V CE: 16 A, CEE7; 115 V ETL: 15 A, NEMA-15
W: 483 mm (19"), H: 88.9 mm (3.5" - 2 RU), From front mounting rails D: 391 mm (15.4")
7 kg (19.8 lbs.) / 10 kg (26.4 lbs)
7.5 kg (24.2 lbs) / 10.5 kg (30.8 lbs)
CE EN55103-1 (Emissions), EN55103-2 (Immunity), EN60065, Class I (Safety)
MCX 86
6
30 W
50 W
80 W
100 W
160 W
<0.05%
<0.1%
>106 dB
20Hz - 20kHz
>200
20V /uS
20k / 10kOhm
>50 dB
0.775 V
27.3 dB
I.C. Class AB
1.1 A
2.3 A
0.1 A
8.5 kg (24.2 lbs) / 11.5 kg (30.8 lbs)
Via Montello, 19 - I-28066 Galliate (NO) ITALY
Tel. +39 0321865271 - Fax +39 0321861674
e-mail: info@kindaudio.com
A&AG S.r.l. doesn't undertake responsibility for mistakes or imprecisions.
Copyright © 2014 A&AG S.r.l. All rights reserved.
MCX 126
6
50 W
90 W
120 W
180 W
240 W
<0.05%
<0.1%
>106 dB
20Hz - 20kHz
>200
20V /uS
20k / 10kOhm
>50 dB
0.775 V
29 dB
I.C. Class H
1.4 A
3.0 A
0.1 A
9 kg (28.6 lbs) / 12 kg (35.2 lbs)
KIND is a trademark of
A&AG S.r.l.
www.kindaudio.com
Item no. UM_MCX_V02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcx 86Mcx 124Mcx 126

Table of Contents