Advertisement
Available languages
Available languages
the unit or rotate the jog wheel.
*Note: When the power adapter (not included) is
connected, the backlight will always be on and
there will be no battery indicator.
Recording with the G3
Setup (Input / Output Connections)
LINE IN
GUITAR IN (5) is where you connect the
signal coming from your source via an 1/4"
(6.35 mm) input.
PHONES/ LINE OUT (6) sends the signal to
Connections and System Control
13
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
headphones or an output source through a
1/4" (6.35 mm) output.
*Note: Files that were recorded by the iKEY G3
are named according to the format of the file
and are numbered according to the sequence
in which they were recorded. For instance,
iKEY_001.MP3,
MP3, iKEY_002.WAV.
Recording Options
PHONES/
With the G3, several different types of re-
LINE OUT
cordings can be made. The FORMAT/STE-
fig. 1.5
REO-MONO (10) button is used to set what
bit rate format to record as, and whether to
record in Stereo or Mono.
*Note: These settings can only be selected
when you first enter record mode, and cannot
iKEY_001.WAV,
iKEY_002.
be changed once a recording has begun.
To enter
, press the RECORD
record mode
(11) button.
When in
, push the FORMAT/
record mode
STEREO-MONO button down to alternate
between bit rate formats.
(Included bit rate formats are listed as follows)
Bit Rate (Format) : Mem. Usage/ Quality
128kbps (MP3) : ≈ 55 mb/ hour
Lowest Quality
256kbps (MP3) : ≈ 110 mb/ hour
320kbps (MP3) : ≈ 137.5 mb/ hour
44.1kHZ (WAV) : 600 mb/ hour
Highest Quality
To switch between Stereo & Mono settings,
Advertisement
