Chicco Top Digital Audio Instructions For Use Manual page 16

Low charging level on rechargeable battery
Rechargeable battery flat: the parent unit
will switch off within a few minutes
2. Description of features
2.1 Baby unit
2.1.1 Power
When power is supplied with mains adapter (1):
- insert the mains adapter jack (1) in the power
connector (15) on the side of the unit
- insert the mains adapter plug in an easily
accessible power socket.
ATTENTION:
- Periodically inspect mains adapter (1): If the
power cord or plastic parts show signs of
damage, do not use them and contact a qualified
technician.
- Do not leave mains adapters (1) plugged into the
outlet when devices are not in use and/or not
connected to the mains adapters (1)
2.1.2 Modes of use - Switching on and
Adjustment
The baby unit must be positioned about 1 - 1.5
metres from the child, on a flat, stable surface
and with the microphone (8) directed toward
the child.
ATTENTION: the baby unit, supplied audio cable
(16), mains adapter (1) and its power cord must
be kept out of reach of children.
Switching on the baby unit in Baby Monitor
mode
Press the on/off button (2) for about 3 second.
The baby unit will switch on.
The power and link indicator light (12) will
begin to flash green to indicate that the baby
unit is searching for a connection to start
audio transmission with the parent unit. Once
connection has been established between the 2
units, the power and link indicator light will light
up steady green. Keep the button (2) pressed for
3 seconds until the green power and link indicator
(12) switches off. The baby unit will switch off.
Nightlight
A night light (5) is present on the baby unit.
The nightlight can be set with a dual function:
nightlight at minimum intensity and steady to
reassure the child while he sleeps, and a nightlight
with high intensity, variable light to accompany
him while he falls asleep.
Switching on/off the baby unit in Music mode
Playing Lullabies
Playing from a music player that is not included
Temperature sensor
2.2 Parent unit
2.2.1 Power and recharging
ATTENTION. The charging of rechargeable
batteries should only be done via the supplied
mains adapter (1) and can be performed both if
the parent unit is switched on and if the parent
unit is off.
In the event of power with mains adapter (1) or
rechargeable lithium-ion battery charging:
- insert the mains adapter jack (1) in the power
connector (19) on the side of the unit
- insert the mains adapter plug in an easily
accessible power socket.
ATTENTION:
- Periodically inspect mains adapters (1). If
the power cord or plastic parts show signs of
damage, do not use them and contact a qualified
technician.
- Do not leave mains adapters (1) plugged into the
outlet when devices are not in use and/or not
connected to the mains adapters (1)
2.2.2 Modes of use - Switching on and
Adjustment
Parent unit parent unit on/off in Baby Monitor
mode
Press the on/off button (2) for about 3 seconds.
The parent unit will switch on in Baby Monitor
mode.
The power and link indicator light (12) will begin
to flash green and the display (5) will show the
icon to indicate that the parent unit is attempting
to establish a connection with the baby unit.
Once connection has been established between
the 2 units, will be shown and the power and
link indicator light (12) will light up steady green.
Keep the button (2) pressed for 3 seconds until
the green power and link indicator (12) switches
off. The parent unit will switch off in Baby
16