Chicco Top Digital Audio Instructions For Use Manual page 14

parent unit and cause danger to the user.
- Adapter power cords cannot be replaced and,
therefore, in case of damage, do not continue
to use the mains adapter but replace it with an
identical type adapter.
Attention: Do not use a mains adapter different
from the one supplied with this Artsana S.p.A.
product, as doing so renders the product non-
compliant with technical standard specifications
established by the relevant EC directives affecting
product safety and integrity. Contact the retailer
or Artsana S.p.A. to replace.
- Ensure that AC/DC mains adapters voltage
(see data plate located on the AC/DC mains
adapters) matches that of the mains electricity
and that the mains adapter plug is compatible
with your electrical system outlets.
- Connect the AC/DC mains adapters to easily
accessible power outlets which are, however,
out of reach of children. Position AC/DC
mains adapter cords so as to prevent the cord
from being walked on, from getting caught in
items placed upon or against them, or from
being accessible to the child and therefore
constituting a risk (tripping, choking).
- When playing music through music player, and
audio cable, make sure that the unit, the player
and audio cable are kept out of reach of children.
- The AC/DC mains adapters, the baby unit and
the parent unit may be become hot to the touch
when in use. This is normal.
- Always disconnect the AC/DC mains adapters
from the power socket when the appliance is
not in use.
- Always disconnect the baby unit audio cable
when the unit is not being used to listen to
music. Store it out of the reach of children.
- Do not leave the parent unit headphones and
audio cable unattended and within reach of
children.
- The replacement of Alkaline batteries or
the rechargeable lithium-ion battery must
always be carried out only by an adult and
with rechargeable batteries having the same
characteristics as those mentioned in this
instruction manual.
- Important: the temperature sensor (9) on the
baby unit should be used only as indicative tool
for detecting the temperature in the child's
room and is not intended to be used as a medical
instrument.
ATTENTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE PROTECTION OR ATTEMPT
TO OPEN MAINS ADAPTERS.
DO NOT WET MAINS ADAPTERS, THE BABY
UNIT OR PARENT UNIT. DO NOT EXPOSE TO
HUMIDITY OR ATTEMPT TO OPEN THEM. THIS
MAY BE A SOURCE OF DANGER AND SHALL
VOID THE WARRANTY.
Configuration & Features
1 System features
1.1 Baby unit
1. Power via 100-240V ~ 50/60Hz /6V
500mA mains switching adapter or via two 1.5V
AAA /LR03 Alkaline batteries (not included)
2. On/Off button
3. Night light On/Off button
4. Lullaby On/Off/Selection button
5. Nightlight
6. Baby unit loudspeaker +,- Volume Adjustment
Button
7. Baby unit +,- Volume adjustment button
8. Microphone
9. Temperature sensor
10. Loudspeaker for the reproduction of sounds
coming from the parent unit in Baby Monitor
mode or music in Music mode.
11. Audio input
12 . Power and link indicator light:
(a) Steady green: linked with parent unit
(b) Flashing green: absence of or loss of link with
parent unit
(c) OFF: baby unit off in Baby Monitor mode or on
in Music mode.
13. Alkaline battery status indicator light:
(a) Flashing red: Alkaline batteries almost flat
(b) OFF: Alkaline batteries charged or operation
via mains adapter (1)
14. Alkaline battery compartment closing panel
15. Baby unit power connector
1.2 Parent unit
1. Power via supplied rechargeable 3.7V 800mAh
lithium-ion battery or via 100-240V ~ 50/60Hz
/6V
2. On/Off button
3. Lit level indicator bar for sounds emitted by
the child
4. Button to activate parent-child communication
("TALK" function)
5. 1.6" LCD display
14
500mA mains switching adapter