Midland BT NEXT Instruction Manual page 27

When successfully paired, the Blue light of the unit will be on for one second and
than the unit will exit the setup mode and switch to the working mode (the Blue
light will start flashing).
You can use now your BTNext together with the Phone.
How to use a Phone
After pairing your phone to the BTNext unit you must switch to the "Phone" mode
in order to use it. Press the middle button until you hear "Phone" from the voice
announcement. Now all the three main button are dedicated to the phone (see
Table B)
Answering a call
When you hear the phone ring, you can answer in two different ways:
Vocally:
Simply say one word to answer the call and start talking.
Remembering that you can only do this if you answer the call after the third Ring.
Attention: be aware that some phones may not support voice answering
Manually:
Tap the "Forward" button and start speaking.
Rejecting a call
If you don't wish to answer, you can let the mobile phone ring or press the
"Forward" button for a few seconds (you will hear one audio confirmation tone).
Making a call
There are several ways to make a call.
From the mobile keypad:
Dial the number on the mobile keypad:
Press "Send" on the mobile phone.
To redial the last number:
Press "Forward" button for 3 seconds in order to redial the last number (you will
hear one audio confirmation tone).
B-Phone mode
Mode Forward button
Phone Short press: Voice dial /accept or close if it is
in progress
Long press: redial last number/ or reject
incoming call
Phone (when music play) Short press: Forward the song
To make a voice call:
Briefly press "Forward" button. If your mobile phone supports voice calls, you will
be asked to speak the name of the contact you wish to call.
Priority: Calls have a high priority, which means that all other communications are
temporarily disabled when a call arrives and automatically re-enabled once the call
ends.
Ending a call
There are several ways to end a call:
› Wait for the called person to end the call.
› Press the "Forward" button (you will hear an audio confirmation tone).
› Press "End" button on the mobile phone.
Using the MP3 player feature of the mobile phone
Many mobile phones are now designed to be used as stereo MP3 players. The
BTNext device fully supports the A2DP and AVRCP protocols that enable you to
listen to stereo music and remotely control your mobile phone's MP3 player. You
can even use the buttons on the BTNext unit to control the following play options:
Play, Pause, Forward and Backward.
Forward
Available controls:
› To play/pause music: click on the "Middle" button.
› To skip forward to the next song: press the "Forward" button.
› To skip backwards to the previous song: press the "Rear" button..
Middle button
Long press: Change mode
Short press: Play/pause
Long press: Change mode
Midland BT Next - 10
Play/Pausa Backward
Rear button
Long press: toggle on/off wired
Short press: Backward the song