Charging The Battery - Panasonic DMC-TZ110 Basic Operating Instructions Manual

Charging the battery

• The battery that can be used with this unit is DMW-BLG10E.
• The battery is not charged when the camera is shipped. Charge the battery
before use.
• We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C.
Make sure that the camera is turned off.
1 Insert the battery to this unit, and then connect this unit to the
AC adaptor (supplied) ( ) or a PC ( )
Charging lamp
USB connection cable
(supplied)
[CHARGE] socket
• This terminal is located at the bottom when the
camera is in an upright position.
• Always check the direction of the pins and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the pins could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
To the electrical outlet
Computer
Getting ready:
Turn on the computer.
SQT1184 (ENG)
Preparations
13