Shutter Button - Panasonic DMC-TZ110 Basic Operating Instructions Manual

Table of Contents

Advertisement

Shutter button (Taking pictures)
• Press the [
1
Press the shutter button halfway (press lightly) to
focus on the subject
• The aperture value and shutter speed are displayed. (If the
aperture value and shutter speed are shown in red and flashing,
you do not have the appropriate exposure, unless you are using
the flash.)
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
2
Press the shutter button fully (push the button all
the way), and take the picture
Pictures can be taken only when the image is correctly focused as long as
the [Focus/Release Priority] is set to [FOCUS].
Even during menu operation or picture playback, if you press the shutter button
halfway, you can instantly set the camera ready for recording.
Estimated number of recordable pictures
TZ110/ZS110
1
720
1
(When [Aspect Ratio] is set to [3:2], [Quality] is set to [
and using a card of 8 GB)
2
(When [Aspect Ratio] is set to [4:3], [Quality] is set to [
and using a card of 8 GB)
] button (
) to set the drive mode to [
Shutter speed
Aperture value
TZ80/ZS60
2
800
], [Picture Size] is set to [L] (20M),
], [Picture Size] is set to [L] (18M),
Basics
] ([Single]).
SQT1184 (ENG)
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-zs60Dmc-zs110Dmc-tz80

Table of Contents