Panasonic DMC-TZ110 Basic Operating Instructions Manual page 32

Recording
1
Press the motion picture button to start
recording
• Recording of motion picture appropriate for each
motion picture mode is possible.
• While you are recording motion pictures, the
recording status indicator (red) will flash.
• If some information is no longer displayed on the
screen, press the [DISP.] button or touch the monitor.
• If you press the shutter button down fully, you can
take still pictures while recording motion pictures.
• Immediately release the motion picture button after
pressing it.
2
Press the motion picture button again to end recording
●
If the surrounding temperature is high, or a motion picture is recorded
continuously, [
to protect the camera. Wait until the camera cools down.
●
With recording in a quiet environment, the sound of aperture, focus
and other actions may be recorded in motion pictures. This is not a
malfunction.
The focus operation during recording of motion pictures can be set to [OFF] in
[Continuous AF].
●
Motion pictures with [Rec Quality] setting of [FHD/28M/50p]/[FHD/17M/50i] in
[AVCHD]:
Recording stops when the continuous recording time exceeds 29 minutes and
59 seconds.
●
Motion pictures with their file size set to [FHD], [HD] or [VGA] in [MP4]:
Recording stops when the continuous recording time exceeds 29 minutes and
59 seconds or the file size exceeds 4 GB.
• Since the file size becomes larger with [FHD], recording with [FHD] will stop
before 29 minutes 59 seconds.
32
SQT1184 (ENG)
] is displayed and recording may be stopped halfway through
Recording state indicator
Elapsed recording
time
Remaining recording
time