[Post Focus] - Panasonic DMC-TZ110 Basic Operating Instructions Manual

Recording

[Post Focus]

Recording mode:
You can record bursts of photos with the same quality as a 4K photo while
automatically changing the focus point ([Post Focus] recording). After recording,
you can select a point on the screen to save a picture with that point as the focus
point.
• To record pictures, use a UHS Speed Class 3 card.
• During recording, the angle of view will be narrower.
1
Press [
2
Press
[MENU/SET]
• It can also be set by going to the [Rec] menu and
selecting [ON] for [Post Focus].
3
Determine the composition and press the shutter button
halfway
• Auto Focus activates and automatically detects the focus point on the
screen.
• If there is no focus point on the screen, the Focus indicator (
blinks and you cannot record.
From halfway pressing the shutter button to completion of recording
• Do not change the distance to subject or the composition.
4
Press the shutter button fully to start
recording
• The focus point changes automatically while recording. When the recording
progress bar disappears, recording automatically ends.
• A motion picture will be recorded in MP4 format. (No audio is recorded.)
28
SQT1184 (ENG)
] button
to select [ON] and press
[Post Focus] icon
(green))
Recording progress bar
Recording in post focus Recording in post focus