Xoro HSD 8450 Operation Manual page 92

SETUP
Video Setup Page
The Video Setup Page includes the settings
for „Component", „Resolution", „Quality", and
„HDMI Setup".
Component
The setting component specify the kind of
video output.
RGB
This setting is useful, when you connect the
DVD player with your TV set and the TV set
has a SCART connector which supports
RGB signals. With RGB signals on SCART
you can get a better picture quality compare to FBAS signals (YUV setting).
YUV
This setting is useful, when you connect the DVD player with your TV set and the TV set has
a SCART connector which does supports RGB signals. Here you need the YUV setting for
getting FBAS signal by SCART.
If you connect the DVD player with a 3-wire component cable and connect them by YPbPr to
your TV set, than please use also the YUV setting.
Off
If you connect the DVD player by S-Video with a S-Video cable to your TV set, than please
the setting S-Video.
Resolution
With this option you can choose the resolution when you have connected the player with a
HDMI or an 3-component wire to the TV set. The player provided an up-scaling function, so
that the video output are extrapolate to maximum of 1080. On one side you can select the
resolution for PAL or NTSC content and TV set's. In case of an 3-componend-wire connec-
tion you can also choose the progressive video output by using every resolution with the
sign "p", for example 576p, 720p or 1080p.
Settings for PAL:
576i, 576p, 720p50, 1080i50 and 1080p50
Setting for NTSC:
480i, 480p, 720p60, 1080i60 and 1080p60
The option "MULTI" try to adjust the setting automatically with
the TV set.
Notes:
Please uses only this kind of resolution which is provided by the TV set.
40
HSD 8450
Downloaded From Disc-Player.com Xoro Manuals