Pci Express-To-Pci Bridge; Led Indicators - National Instruments NI PCIe-8360 User Manual

PCI Express-to-PCI Bridge

LED Indicators

© National Instruments Corporation
The PCI Express Base Specification defines a PCI Express-to-PCI bridge
as a device that connects a PCI Express fabric and a PCI hierarchy. On the
NI PXI-8360, the PCI Express-to-PCI bridge connects the x1 PCI Express
link and the PCI bus in a PXI or CompactPCI chassis.
The LEDs on MXI-Express give status information about power supplies
and link state. The NI PCIe-8360 has two tri-color LEDs, one for each port
on the panel. The NI PXI-8360 has two LEDs, one for power supply status
and one for link state.
The LEDs on the NI PCIe-8360 indicate the following:
Color
Off
Red
Amber
Green
The LEDs on the NI PXI-8360 indicate the following:
LED
PWR
LINK
Meaning
Power is off
Power is out of spec
Power is within spec; no link to chassis
Power is within spec; link established
Color
Off
Red
Green
Off
Green
3-3
Chapter 3 Hardware Overview
Meaning
No power
Power is out of spec
Power is within spec
Link not established
Link established
MXI-Express Series User Manual