TIP
Press the Reset (SF-Reset, or Soft-Reset) switch on the housing of a powered-on AP to reset the
configuration settings to factory-default values.
Global
User Name
Password
IEEE 802.11g
Regulatory Domain
Channel Number
SSID
SSID Broadcasts
Transmission Rate
Transmit Power
MAC Address
Security Mode
Selected WEP Key
WEP Key #1
WEP Key #2
WEP Key #3
WEP Key #4
MAC-Address-Based Access Control
Access Control Table Type
Wireless Client Isolation
AP Load balancing
Link Integrity
Association Control
Max Number of Clients
Block Clients if Traffic Load Exceeds Disabled
Setting Name
Default Settings
Appendix A
Default Value
admin
root
FCC (U.S.) or ETSI (Europe)
11 for FCC or 13 for ETSI
NI
Enabled
Auto
100%
See the label on the accompanying PCMCIA card
or the label on the housing of the NI
WAP-3701/3711.
Open System
Key #1
00-00-00-00-00
00-00-00-00-00
00-00-00-00-00
00-00-00-00-00
Disabled
Inclusive
Disabled
Disabled
Disabled
64
A
A