Table of Contents
Advertisement
NI WAP-3701/3711 User's Manual
Overview
Menu Structure
The left side of the home page contains a menu that you can use to carry out commands. Here is a
brief description of the hyperlinks in the menu:
Home. For returning to the home page.
Status. Status information.
Wireless Clients. The status of the wireless clients currently associated with the AP.
DHCP Mappings. Current IP-MAC address mappings of the built-in DHCP server.
System Log. System events log.
Link Monitor. When the NI WAP-3701/3711 is in AP Client mode, this page shows the
signal strength and link quality of the wireless link to its associated access point.
General. Global operations.
Operational Mode. Operational mode of the NI WAP-3701/3711—AP/Bridge or AP
Client.
Password. For changing the settings of the NI WAP-3701/3711.
Firmware Tools. For upgrading the firmware of the NI WAP-3701/3711, backing up and
restoring the configuration, and resetting the NI WAP-3701/3711's configuration to
factory defaults.
TCP/IP. TCP/IP-related settings.
Addressing. IP address settings for the AP to work with TCP/IP.
DHCP Server. Settings for the DHCP (Dynamic Host Configuration Protocol) server on
the Access Point.
IEEE 802.11. IEEE 802.11g-related settings.
Communication. Basic settings for the IEEE 802.11g interface of the NI
WAP-3701/3711 to work properly with wireless clients.
Security. Security settings for authenticating wireless users and encrypting wireless data.
IEEE 802.1X/RADIUS. IEEE 802.1X Port-Based Network Access Control and RADIUS
(Remote Authentication Dial-In User Service) settings for better wireless security.
Advanced. Advanced settings of the NI WAP-3701/3711.
Packet Filters. Ethernet Type Fiters, IP Protocol Filters, and TCP/UDP Port Filters
settings.
Management. UPnP, System Log, and SNMP settings.
3-2
Web Console Configuration
Advertisement
Table of Contents
