Easy-To-Use Functions; Plasmacluster Ion On/Off; Child Lock; Indicator Light Bright/Dim/Off - Sharp FU-D40A Operation Manual

EASY-TO-USE FUNCTIONS

PLASMACLUSTER ION
When you want to turn Plasmacluster Ion (
ON OFF
Beep

CHILD LOCK

When you want to prevent children from misoperation.
To enable To disable
Beep
Press and hold 3 seconds or longer

INDICATOR LIGHT BRIGHT/DIM/OFF

When you want to dim out control panel sensors or Plasmacluster ION indicator lights.
Each press will change the setting in
the following sequence.
Beep Beep
BRIGHT
Beep
DIM
Beep
If the brightness is set to BRIGHT, the unit will begin with the BRIGHT setting next time.
NOTE If the brightness is set to DIM or OFF, the unit will begin with the DIM setting next time you start it.
The orange indicator light above the INDICATOR LIGHT BRIGHT/DIM/OFF button will be turned on only
when the filter needs to be cleaned. It does not affect the brightness of the control panel indicator light.
E - 10
ON/OFF
) on/off.
Beep Beep
Beep Beep
While CHILD LOCK is enabled, you
NOTE
can do nothing but disable it.
Indicator Lights
Bright display
Dim display
No display
ADJUSTMENT OF SENSOR SENSITIVITY
(Running stopped)
Press and hold 3
Beep
seconds or longer.
(Within 8 seconds)
Set your desired
sensor sensitivity.
Beep
What the sensor can perceive
Dust (dirt, mite feces, skeletons, spores of mould and pollen) and smoke from cigarettes, etc.
Odor from cigarettes, incenses, cosmetics, alcohol, mist spray, etc.

OFF TIMER

When you want to set the auto shutdown time.
(Running)
Beep
8h
4h
2h
Beep Beep
8h
4h
2h
Dust sensor or odor sensor
Steady red Set it to L.
Steady green Set it to H.
The FAN SPEED indicator light shows
the current sensor sensitivity.
(The factory default is NORMAL.)
Each press will change the setting in
the following sequence.
Beep Beep
Beep Beep
POLLEN MED HIGH
LOW NORMAL HIGH
If no operation is performed within 8
seconds, the unit ends the adjustment
automatically.
The sensor sensitivity settings are
stored in the memory and will not be
lost even in the event of power failure.
Each press will change the setting in
the following sequence.
Beep Beep Beep
Beep Beep
DISABLE
2h 4h 8h
E - 11