How To Operate; Air Purification; Ion Shower - Sharp FU-D40A Operation Manual

HOW TO OPERATE

2
Press
To select your desired fan speed.

AIR PURIFICATION

Beep
Select your desired
fan speed.
Beep
E - 8
3 1
Press Press
Start operation.
To enter the SHOWER mode.
Insert the power
plug into the
power socket.
Insert the power plug into the power
socket. The unit begins operation with
the AUTO fan speed, INDICATOR
E - 9 LIGHT BRIGHT, and
PLASMACLUSTER ION ON.
Each time you turn the unit on, it starts
from the same mode as the last time.
FAN SPEED
While the unit runs in the air purification mode, you can change the fan speed.
While the unit runs in the ION SHOWER
speed and the FAN SPEED indicator light is off.
Select your desired fan speed. Each press will change the fan speed in the following sequence.
Beep Beep
AUTO
The unit automatically adjusts the fan speed and operation mode by detecting dust and odor
according to the conditions of the room.
After running at a high fan speed for 10 minutes, the unit runs alternatively between a high speed
and a low speed every 20 minutes to effectively remove pollen.
The fan works quietly at a low speed.
The fan rotates at a medium speed.
The fan rotates at a high speed. (The operation becomes louder.)

ION SHOWER

When the air in the room suddenly becomes dirty.
Beep
Beep
When the PLASMACLUSTER ION is OFF, the unit does not release any Plasmacluster Ions,
NOTE
but it can remove dust and odor.
mode, you cannot change the fan
Beep Beep Beep Beep
POLLEN LOW MED HIGH
When you need to remove virus and pollen
after getting home.
While or after you use a vacuum cleaner.
After wet clothes are brought into the room.
When you wish to remove odor as soon as
possible.
When you need to remove odor after
cooking or during room cleaning.
Press the POWER button to end the
ION SHOWER operation.
Press the FAN SPEED button to switch
from the ION SHOWER mode to
another mode.
E - 9