Pioneer DV-626D Operating Instructions Manual page 44

Hide thumbs Also See for DV-626D:
Table of Contents

Advertisement

Available languages

Available languages

Adjusting the picture quality settings
2,3
1
Press VIDEO ADJUST.
2
Use the cursor button (∞) to select "Video
Setup" and press ENTER.
3
Use the cursor buttons (5/∞) to select the
setting to adjust.
DNR
Move
The settings rotate in the following order.
DNR: adjust to control the amount of signal noise in
the luminance component of the video signal
Sharpness: adjust the clarity of the picture
Detail: adjust the edges in the picture
Gamma: adjust the brightness of the darker images
in the picture
Chroma Delay: adjust the delay of the Y
(luminance) and C (color) components of the video
signal
Memory: select a memory location at which to
save your settings
44
En
1
DISPLAY
4
5
2,6
4
¢
1
3
¡
8
7
e
E
min
max
Select
Check
ENTER
DISPLAY
4
Use the cursor buttons (2/3) to adjust the
settings.
If a DVD or Video CD is playing, the changes will be
visible on the screen as they are adjusted.
5
Repeat steps 3 and 4 to make adjustments to
other settings.
If you would like to save the settings in the player's
memory, be sure to select either "1", "2", or "3" in
the [Memory] setting to establish which memory
location to save the new settings in. Please note
that if you select a location where settings have
already been saved, the old settings will be
replaced by the new ones.
Memory
Move
6
When you are finished making adjustments,
press ENTER to establish the new settings.
To display all of the settings at once
Pressing DISPLAY enables all of the current settings to
be viewed on one screen. Adjustments may also be
made when this screen is displayed, by using the cursor
buttons (5/∞) to select a setting, and the cursor buttons
(2/3) to adjust the selected setting.
DNR
Sharpness
Detail
Gamma
Chroma Delay
Memory
Note
If the Setup screen is opened during playback of a DVD being
viewed in the letter box format, the screen may switch to the
wide screen format. This is not a malfunction, and the screen
will return to normal when the Setup screen is closed.
Off
1
2
3
Select
Check
ENTER
DISPLAY
min
max
+
min
max
+
+
Off
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents