Changing To The Setup Screen "Expert" Menu Mode; Setting The Video Output Format For Av Connector Connections - Pioneer DV-626D Operating Instructions Manual

9
7
7
Use the cursor buttons (5/∞) to select a new
setting and press ENTER to set the new
setting in memory. Press RETURN
cursor button (2) to exit the options without
making any changes.
8
Press RETURN
go back to the main menu bar to select
another menu.
9
Press SETUP to close the Setup screen.
The Setup screen closes.
How to interpret the setting indicator colors in
the Setup screen menus
When setting up the system, or when making
adjustments, it is convenient to know what settings are
applicable to the different disc formats. When the
settings appear for each menu option, the currently
selected setting appears with the setting indicator
highlighted in one of three colors: blue, green or yellow.
These colors correspond to what formats the menu
option effects as shown in the table below.
Color of indicator
Blue
Yellow
Green
Note
If a setting applicable only to DVDs is changed while a Video CD
or CD is loaded, a blue DVD icon appears in the upper right hand
corner of the screen to indicate that the setting is not applicable
to the currently loaded disc. The setting will be effective the next
time a DVD is loaded.
30
En
8
7
5
7,8
4 ¢
1 3 ¡
8 7 e E
or the cursor button (2) to
Disc format(s)
DVD only
DVD / Video CD
All compatible formats
IMPORTANT
Changing to the Setup Screen
"Expert" Menu Mode
The Setup screen menus are divided into two levels,
"Basic" and "Expert", to make this unit more
convenient to operate for different levels of users. The
"Basic" menu mode contains functions that may be
considered necessary for the basic operations of this
player and helpful on-screen information identified by the
i mark. The "Expert" menu mode adds to the "Basic"
menu mode additional functions of the player that can
be adjusted to further personalize performance of the
player.
In this manual, functions that are contained in the
"Expert " menu mode are identified by the Expert icon.
Make changes to the [Setup Menu Mode] setting in the
Setup screen General menu.
or the
Settings: Expert
Basic*
Note
On-screen information only appears in the "Basic" menu mode.
Setting the Video Output
Format for AV CONNECTOR
Connections
When connections are made to the AV CONNECTOR on
the player via a SCART cable, it is possible to select the
video format that is compatible with your TV or monitor.
Select "Video" to have a composite video signal output,
"S-Video" to have an S-video signal output, and "RGB"
to have an RGB signal output. For more information on
which format is most appropriate, refer to the
instructions supplied with your TV or monitor.
Make changes to the [Video Out] setting in the Setup
screen Video menu.
Settings: Video*
S-Video
RGB
Audio1 2 Video Language General
Setup Menu Mode Expert
Basic
Setup Navigator
Parental Lock – Level 8
Change menu mode
Move Exit
SETUP
Audio1 2 Video Language General
TV Screen – 16:9(Wide)
Video Out
Video
S-Video
RGB
Set AV CONNECTOR video format
Move SETUP Exit
* Factory setting
* Factory setting