Pioneer DV-626D Operating Instructions Manual page 24

Setting digital audio connections
to an AV amplifier or decoder
The [Digital Jacks] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
to determine what digital audio formats can be decoded.
If you have made no digital connections, select "Not
Connected".
Audio1
Setup Navigator
Amp Connection
Compatible with Dolby Digital
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
Audio1
Setup Navigator
Amp Connection
Digital jack not compatible with 96 kHz
Settings: No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of
96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of
96 kHz.
Don't Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
24
En
2 Video Language General
Dolby Digital
Dolby Digital/DTS
Dolby Digital/MPEG
Digital Jacks Dolby D/DTS/MPEG
PCM
Not Connected
Move ENTER Select SETUP Exit
* Factory setting
2 Video Language General
No
96 kHz PCM Audio
Yes
Don't Know
Move ENTER Select SETUP Exit
* Factory setting
Note
• When a DVD is played back in the letter box format, Linear
PCM digital audio playback is output is automatically
downsampled to 48 kHz (when the original signal is 96 kHz). In
order to hear audio at the sampling rate of 96 kHz, set the
Setup screen Video menu [TV Screen] setting to either
"Wide" or "4:3 (Pan & Scan)" (page 34).
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Audio1 2 Video Language
Setup Navigator
Exit Setup Navigator
Confirm setup adjustments
Move ENTER
Settings: Valid*
Select to have the player make all of the
necessary audio, video and language settings
automatically.
Invalid
Select to exit the Setup Navigator without
changing any of the system settings.
Redo
Select to return to the [OSD Language] screen
of the Setup Navigator and do the settings
again.
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen General menu appears. Press Setup
to close the Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 29.
General
Valid
Invalid
Redo
Select SETUP Exit
* Factory setting