Bosch Indego Original Instructions Manual page 32

OBJ_BUCH-1573-003.book Page 32 Friday, November 23, 2012 9:10 AM
32 | English
Problem Possible Cause
Garden product Height of cut too low
leaves ragged finish
Cutting blade blunt
Possible clogging
Areas left uncut Time slot not long enough for garden size
Battery duration
Distance between obstacles sourrounded by
perimeter wire is less than 1 m
Rough lawn conditions
Excessive vibra- Blade nut/bolt loose
tions/noise
Cutting blade damaged
No charging proce- Charging pins corroded
dure possible
Possible internal fault
Garden product un- Perimeter wire not correct aligned
able to dock
The LED on the Mains plug of power supply not plugged in
docking station does (properly)
not light up
Possible faults with the socket outlet or mains
cable
Power supply or docking station fault
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Additionally be aware of your product's software version (see
"Menu > Settings > System Options > Info").
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
F 016 L70 825 | (23.11.12)
Corrective Action
Increase height of cut
Replace the blade
Check underneath the garden product and clear out
as necessary (always wear gardening gloves)
Incease mowing time slot
Contact your Bosch Service Centre
Increase distance between perimeter wire
Note: Obstacles with a height of more than 6 cm do
not require to be wired
Increase/decrease cutting lane proximity from "mow
settings"
Tighten blade nut/bolt
Replace the blade
Clean the charging pins
Contact your Bosch Service Centre
Check perimeter wire and align it
Insert mains plug (fully) into the socket outlet
Have the mains voltage supply checked by an author-
ized electrician
Have the power supply or docking station checked by
your Bosch Service Centre
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Bosch Power Tools