Type 2; Connecting The Base Station To A Standard Fixed Line Phone; Connecting The Base Station To A Fixed Line Dhsg Phone - Sennheiser VMX OFFICE Instruction Manual

Type 2:

Connecting the base station to
a standard fixed line phone
Disconnect the handset from your
fixed line phone, but leave it on the
phone.
Plug the free handset cable connector
to the base
socket .
Connect the cable which is already
connected to the base station
(PHONE socket
phone socket where the handset
cable was connected before.
To test the phone connection:
Pick up the handset.
If the dial tone is heard in the hand-
set, the system is connected cor-
rectly. If no dial tone is heard, please
refer to "Adjusting the VMX OFFICE
system to your fixed line phone" on
page 10.
8
station HANDSET
) to the fixed line
Type 3:
Connecting the base station to
a fixed line DHSG phone
Connect the accessory cable (RJ 45
DHSG cable, not included) to the
AUX/DHSG socket
DHSG phone.
For how to connect special
phones with call control,
please contact your service
partner.
To test the phone connection:
Make sure that the base station AUX
´
LED is lit. If it is not lit:
Press the AUX button
´
The AUX LED
Put on the headset.
On the headset, press the hook
button .
If the dial tone is heard in the
handset, the system is connected
correctly.
If no dial tone is heard, please refer to
"Adjusting the VMX OFFICE system to
your fixed line phone" on page 10.
¸
¸
and to the
¿
( ).
is on lit.