Electromagnetic Compatibility - National Instruments Isolated Current Output Module SCC-CO20 User Manual

Environmental
Safety
Note For UL and other safety certifications, refer to the product label or the
Product Certification

Electromagnetic Compatibility

For the standards applied to assess the EMC of this product, refer to the
Note
Product Certification
Note For EMC compliance, operate this product according to the documentation.
For EMC compliance, operate this device with shielded cables.
Note
CE Compliance
SCC-CO20 Isolated Current Output Module User Guide
Operating temperature ............................0 to 50 °C
Storage temperature ................................–20 to 70 °C
Humidity .................................................10 to 90% RH, noncondensing
Maximum altitude...................................2,000 m
Pollution Degree (indoor use only) ........2
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
section.
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326 (IEC 61326): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
section.
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
12
Online
Online
ni.com