Table of Contents
Advertisement
LOW- POWER BATTERY VOICE PROMPT
When the battery pack has low power, the transceiver will sound "low battery pack", and the LED
will blink every 5 seconds.
TRANSMISSION OVERTIME PROMPT
When a transmission exceed the pre-set time, there will be a sound warning "transmit overtime"
and the transmission will stop. Press PTT to transmit again.
BATTERY CHARGE
Insert the AC plug into the outlet (AC: 90-240V). The charger indicator start blinking, indicating that
it is in charging standby .
Insert the transceiver (with the battery pack) into the charger; the RED indicator turns on, indicating
that the recharging begins. Once the led indicator become green, the battery pack will be fully
charged.
NOTE:
If the battery pack is totally discharged, the red led will blink for 10-20 minutes. Once the battery
pack is fully charged the led indicator will become green.
13
Advertisement
Table of Contents
