Accessories; Remote Controller Installation Procedure - Daikin BRC1E51A7 Installation Manual

2.

Accessories

The following accessories are included.
Wood screw Small screw
(φ3.5×16)
(2 pcs.)
3. Remote controller installation
procedure
3-1 Determine where to install the remote controller.
Make sure to follow "
3-2 Make a wiring through hole on the wall if the wires are taken
out from the back side.
Lower case
Through hole
3-3 Remove upper case.
Insert a screwdriver in the recess of lower case to remove the upper case (2 points).
Remote controller PC-board is
installed on the upper case. Take care
not to damage the PC-board with the
screwdriver.
Take care that dust or moisture does
not touch the PC-board of removed
upper case.
4
Clamp
(M4×16)
(2 pcs.) (1 pc.)
1. Safety Precautions
Through
hole
8-10
Manual CD
(1 pc.)
" when determining the location.
External view of the remote controller
8-10
Set the center of the wall hole
to the center of the wiring thro
ugh hole on the controller
lower case when making the
hole.
48.5
CAUTION
If the hole size is too large or the location is not
proper, the hole may come out from the controller.
Screwdriver
Insert and twist the screwdriver
lightly for removal.
Quick
Wiring retainer
Reference
(1 pc.) (1 pc.)
Upper case
Lower case
English