Disassembling/ Assembling Of Switch Section - Makita BFL300F Technical Information

[3] -6. Disassembling/ Assembling of Gear Case Section (cont.)
Fig. 24
Fix lead wires with lead wire holders.
Fig. 25
LED circuit
Switch unit for Clutch

[3] -7. Disassembling/ Assembling of Switch Section

Although Switch section can be disassembled, you can also use Switch assembly to entirely replace Switch section.
DISASSEMBLING
1) Remove Clutch case section and Housing (L).
(Refer to [3] -1, 6.)
2) Remove Switch unit in Trigger while expanding
the ribs. (Fig. 26)
3) Switch unit for rotation reverse can be replaced by
removing PT3x16 Tapping screw, then removing
Cover.
Now the following parts can also be replaced:
F/R Change lever, Leaf spring, Switch lever (A),
Compression spring (A)
Plate
Switch unit in Trigger
Buzzer circuit
Fig. 26
Switch unit in Trigger
Fix lead wires with lead wire holders.
Lens
Terminal
Color of Lead Wires
Switch unit for
rotation reverse
Terminal
ribs
P 8 / 13
Blue, Black
Yellow, White
Yellow, Blue
Purple, Yellow
Red, White
Positive: Red, Negative: Black