Installing Batieries - Memorex CP8 turbo Owner's Manual

INSTALLING THE BATTERIES
The CPS Turbo uses four AA alkaline batteries. The CPS
Turbo requires the extra power of alkalines and might not
perform properly with standard or rechargeable batteries.
1. Move the battery compart-
ment cover by pressing it
in the direction of the ar-
row.
2. Install four new AA batter-
ies, observing the polarity
(+and-) symbols marked
inside the battery com-
partment.
3. If you are installing batter-
ies for the first time, press
and hold the [CANCEL]
key. Then , use a pen or
pencil to press the [RE-
SET] button inside the
battery compartment. The
re-set feature is a two step
process to prevent acci -
dental use.
RESET
Caution: Press [CANCEL] and [RESET] only when you
are installing batteries for the first time . Press-
ing [CANCEL] and [RESET] erases all learned
commands in the CPS Turbo's memory. See
"Troubleshooting."
4. Replace the compartment cover.
Notes:
A set of batteries provides power for up to six months
of normal use. However, to avoid loss of the learned
commands and command sequences, replace the bat-
teries as soon as you see the BATTERY LOW symbol
appear on the display.
,-,.,-,,-,
LI·LILI
The CPS Turbo retains learned commands and com -
mand sequences in memory for 2 1/2 minutes without
batteries. Be sure you have new batteries ready to
install before you remove the old batteries.
The clock stops running when you remove the batter-
ies. You must resetthe clock each time you replace the
batteries.
Never leave weak batteries in the CPS Turbo. They
can leak damaging chemicals.
Do not mix old and new batteries.
5