Nexgrill 720-0783E User Manual page 15

(b). Remove the 2 screws that are pre-attached to the
valve. Insert the side burner valve into the side
burner control panel and bezel. Then align the
valve through the side burner panel opening,
making sure the orifice end is aligned in the burner
opening.
(c). Slide the screws down to the smaller holes and
tighten the screws to secure.
(d). Return to the underside of the side burner and turn
the "C" bracket to close the gap in the front
opening of the side burner tube. Tighten screw to
secure.
e). Insert (1) 5/32" truss head screw (BB) to attach the
sear side burner igniter wire to the burner bowl
15