Nexgrill 720-0783E User Manual page 14

10.Igniter and Battery Assembly
(a). Remove igniter cover and lock washer from igniter,
insert igniter through from back of sear side burner
control panel, secure lock washer from front of sear
side burner control panel.
(b). Install battery into ignition box with positive terminal
facing outward.
(c). Replace the ignition battery cap after the battery
has been installed.
Note: Make sure the igniter is assembled with the wires
upward 45, so that the wires are away from manifold.
11.Sear Side burner Valve Assembly
(a). Loosen but do not remove the "C" bracket on the
burner tube located on the underside of the side shelf
bowl by removing the screw holding it in place, turn
the "C" bracket so the opening of sear side burner
exposed.
Fig.10
Fig.11
14