Using Sd Memory Card; Inserting And Removing - Royal 240DX Instruction Manual

Using SD Memory Card

Inserting and removing

75
C
HAPTER
You can exchange data through an SD memory card between your register and a PC
when managing the data in your register by using the Royal's PC software
"Customer Support Tool".
You can also save all necessary data in the register to an SD memory card for
backup.
This instruction manual describes only those operations needed on the register.
The SD card slot is located on the right side of your register.
Inserting an SD memory card
Insert an SD memory card into the SD card slot with the printed SD logo facing
upwards. Push the card in steady with a finger until it clicks and release it slowly.
Removing the SD memory card
Push the card in gently with a finger and release it. The card will come out.
Note
This model supports SD cards only. Use of any other types of SD cards

such as mini SD, micro SD, etc. with an adapter is not supported.
When inserting or removing the SD memory card, be sure to release it

slowly. Otherwise, the card may pop out and injure your finger.
9
Royal 240DX User's Guide