Basic Wireless Settings; Access Point - Hawking HWABN2 User Manual

3-4-1 Basic Wireless Settings

Please click 'General Setup' menu at the top of web management interface, then click
'Wireless Configuration' on the left hand column. Choose 'Basic Settings'. Next
to the Mode option, please select your Mode.

3-4-1-1 Access Point

Standard default mode. The HWABN2 will broadcast a WiFi signal for other
computers and devices to connect to. Must be plugged into the router or network
after setup.
Band (1):
2.4 GHz (B)
2.4 GHz (N)
2.4 GHz (B+G)
2.4 GHz (G)
2.4 GHz (B+G+N)
3
Please select the radio band from one of following options:
2.4GHz band, only allows 802.11b wireless network clients to
connect to this router (maximum transfer rate 11Mbps).
2.4GHz band, only allows 802.11n wireless network clients to
connect to this router (maximum transfer rate 300Mbps).
2.4GHz band, only allows 802.11b and 802.11g wireless
network clients to connect to this router (maximum transfer
rate 11Mbps for 802.11b clients, and maximum 54Mbps for
802.11g clients).
2.4GHz band, only allows 802.11g wireless network clients to
connect to this router (maximum transfer rate 54Mbps).
2.4GHz band, allows 802.11b, 802.11g, and 802.11n wireless
network clients to connect to this router (maximum transfer
rate 11Mbps for 802.11b clients, maximum 54Mbps for 802.11g
53
1
2
4