Hawking HWABN2 User Manual page 68

Please click 'Go Back' to go back to previous setup menu, or click 'Apply' to reboot
the access point so the settings will take effect. Please wait 30-60 seconds for the
access point to reboot.
3-4-3-3 Wi-Fi Protected Access (WPA):
When you select this mode, the wireless access point will use WPA encryption, and
the following setup menu will be shown on your web browser:
WPA Unicast
Cipher Suite (2):
Pre-shared
Key Format (3):
Pre-shared
Key (4):
After you finish WPA Pre-shared key setting, please click 'Apply' button (5) and the
following message will be displayed on your web browser:
Please select a type of WPA cipher suite.
Available options are: WPA (TKIP), WPA2 (AES), and WPA2
Mixed. You can select one of them, but you have to make sure
your wireless client support the cipher you selected.
Select the type of pre-shared key, you
can select Passphrase (8 or more alphanumerical characters,
up to 63), or Hex (64 characters of 0-9, and a-f).
Please input the WPA passphrase here.
It's not recommended to use a word that can be found in a
dictionary due to security reason.
67
2
3
4
5