Hawking HWABN2 User Manual page 63

DTIM Period(4):
Data Rate(5):
N Data Rate(6):
Channel Width(7):
Preamble Type(8):
Broadcast ESSID(9):
WMM(10):
CTS Protect(11):
value is '100'.
Set the DTIM period of wireless radio. Do not modify the
default value if you do not understand the function, default
value is '3'.
Set the wireless data transfer rate to a certain value. Since
most of wireless devices will negotiate with each other and
pick a proper data transfer rate automatically. It is not
necessary to change this value unless you know what will
happen after modification.
Same as above, but only for 802.11n clients.
Set channel width of wireless radio. Do not modify the
default value if you do not understand the function, default
setting is 'Auto 20/40 MHz'.
Set the type of preamble, do not modify the default value if
you do not know what it is, default setting is 'Short
Preamble'.
Decide if the wireless access point will broadcast its own
ESSID or not. You can hide the ESSID of your wireless
access point (set the option to 'Disable'), so only those
people who know the ESSID of your wireless access point
can connect to the unit.
Wi-Fi MultiMedia (WMM) will enhance the data transfer
performance of multimedia contents when they are being
transferred over a wireless network. If you do not
understand the function, then it is safe to set this option to
'Enable', however, default value is 'Disable'.
Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g/n wireless access
points. It is recommended to set this option to 'Auto' or
62