Topcom SOLOGIC B901 COMBO Short User Manual page 10

Operating the telephone
OK
4 5 6
G J
M
H K N
I L O
Dialling an abbreviated number
M1-M2-M3
3.8 The call list
Incoming calls are stored in a calls list (max. 30 numbers) on the base
station and the handsets.
The number of missed calls is shown by "X MISSED"
(X = number of missed calls) and the flashing CLIP symbol. Briefly
press the calls list key
Important The "caller ID" (CLIP) feature is only available if it is
The telephone number and name of the last caller appear in the
display. If the telephone number is longer than 12 digits, you can show
the remaining digits by pressing the
word "EMPTY" appears in the display.
The date and time of the incoming call are displayed at the top right for
every call.
Info
10
5 Enter the telephone number and confirm.
A confirmation tone is now sounded.
1 Lift the receiver or press the hands free key.
2 Press the abbreviated dialling key.
The telephone number is automatically dialled.
3 Hang up the receiver or press the hands free key
again to end the call.
to display the last call.
activated for your line. Contact your telephone line
provider for additional information.
1 Press the up and down keys to scroll through the
list.
The position number of the call in the calls list
appears next to the CLIP symbol.
2 Press the left and right keys to display the name or
number.
The phone reverts to standby mode if neither the up
or down key
When a call is received, the caller's number is
shown in the display for another 5-8 seconds after
the last ring.
key. If the calls list is empty, the
is pressed within 15 seconds.