Mail; Using E-Mail; Creating And Sending E-Mail Messages - Fujitsu au F001 Basic Manual

Table of Contents

Advertisement

Mail

Using E-mail

To use e-mail, you need to apply for an EZweb subscription.
If you did not apply for an EZweb subscription at the time
of purchase, contact an au shop or the Customer Service
Center. Also, before use, you need to configure initial
settings.
You can send and receive e-mail with other cell phones
that support e-mail, and with PCs. In addition to text
messages of up to 5,000 double-byte (or 10,000 single-
byte) characters, you can also send photos and movies by
e-mail.
The packet communication charge for sending and
receiving e-mail applies to the amount of data sent
and received.
You can send an e-mail message to up to 30 different
addresses at one time.
You can send up to 1,000 e-mail messages per day (a
message with multiple recipients is counted as more
than one message).
Sending and receiving e-mail messages that include
attachment data may take a while.
28

Creating and Sending E-mail Messages

When the standby screen is displayed, press L.
Use a to select Create New and then press
c (Select).
Use j to select Address and then press
c (Select).
Use j to select Quote Adrs Book and then
press c (Select).
Use a to select a phone book entry and then
press c (Select).
If more than two e-mail addresses are saved in the
entry, use j to select an address and then press
c (Select).
Use j to select Subject and then press
c (Select).
Enter a subject and then press c (OK).
You cannot enter single-byte katakana characters or a
new line in a subject.
Use j to select Text and then press
c (Select).
Enter text and then press c (OK).
You cannot enter single-byte katakana characters.
Press & (Send).

Advertisement

Table of Contents
loading

Table of Contents