Entering Pictograms - Fujitsu au F001 Basic Manual

Entering Pictograms

When a character entry screen is displayed, press
& (Char.).
Press % (List).
➡
Use a to select
➡
c (Select).
Use a to select the pictogram you want to
➡
enter and then press c (OK).
• You can enter pictograms consecutively if you press
% (Repeat) instead of c (OK).
• Each time you press
the character entry mode changes in following order:
Choice → Pictograms → Decoration-Emojis →
Symbols → Facemarks...
• You can switch categories of pictograms, decoration-
emojis or face marks by pressing
selection screen.
and then press
in the character entry screen,
/ on each
25