Watching Tv (1Seg); Basic Operations; Exiting The Au Media Tuner - Fujitsu au F001 Basic Manual

Watching TV (1Seg)

When the standby screen is displayed, press c.
Use a to select TV and then press
➡
c (Select).
Use j to select TV (1seg) and then press
➡
c (Select).
To Change Channels
■
Use s to change channels.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
Change channels one by one. Change channels one by one.
1ch 1ch
EZ Channel-Plus/EZ Channel EZ Channel-Plus/EZ Channel
Program 16 Program 16
... ...
• Before using this feature, you must configure au Media
Tuner initial settings (page 43).
• Channels cannot be changed with
operation screen is displayed.
44
TV (1Seg) TV (1Seg)
2ch 2ch ... ... 12ch 12ch
Program 2 Program 2 Program 1 Program 1
when the data

Basic Operations

Launch TV (1Seg) to start receiving data broadcasts.
The data operation screen appears when a data broadcast
is received. Press & (Vol/Ch) on the data operation screen
to switch to the TV operation screen.
On the TV operation screen, pressing N switches the
display.
Data operation screen Data operation screen
& (Vol/Ch) & (Vol/Ch)
& (戻る[Return]) & (戻る[Return])
• To adjust the volume, use
screen.

Exiting the au Media Tuner

Press F, use j to select はい (YES) and then
press c (OK).
TV operation screen TV operation screen
on the TV operation