Original instructions - To extract dust more efficiently, use the protective 1. Conformity Declaration cap (9) and a suitable Metabo vacuum cleaner together with this tool. We, being solely responsible, hereby declare that - The work place must be well ventilated.
Page 6
ENGLISH - Slacken the screw (4). 6. Commissioning - Slid the footplate (5) forwards slightly and turn. - Then slide the footplate (5) forwards or backwards Before plugging in, check to see that the rated and engage in one of the detents (the detents can mains voltage and mains frequency, as stated be viewed through the semicircular opening at the on the rating label, match your power supply.
Page 7
ONLY! drilling a hole beforehand. Only use short saw If you have Metabo electrical tools that require blades. Only at 0° angle setting. repairs, please contact your Metabo service centre.
Page 8
ENGLISH Emission values These values make it possible to assess the emissions from the power tool and to compare different power tools. Depending on the operating conditions, the condition of the power tool or the accessories, the actual load may be higher or lower. For assessment purposes, please allow for breaks and periods when the load is lower.
Need help?
Do you have a question about the STEB 70 Quick and is the answer not in the manual?
Questions and answers