Panasonic SA-BTT350P Service Manual page 68

10.17.3. Replacement of Pulley Gear & Belt
• Refer to "Disassembly of BD Drive".
• Refer to "Disassembly of Upper Base Assembly".
• Refer to "Disassembly of Tray".
Step 1 Push the Post to the direction of arrow by using the slot-
ted screwdriver.
Step 2 Remove the Pulley Gear and Belt.
10.17.4. Replacement Slide Cam
• Refer to "Disassembly of BD Drive".
• Refer to "Disassembly of Upper Base Assembly".
• Refer to "Disassembly of Tray".
• Refer to "Disassembly of Pulley Gear & Belt".
Step 1 Detach 5P FFC at the connector (FP102) on Drive
P.C.B..
Step 2 Lift up the Sheet.
Step 3 Detach 7P FFC at the connector (FP103) on Drive
P.C.B..
Step 4 Detach 45P FFC at the connector (FP101) on Drive
P.C.B..
Step 5 Detach 6P FFC at the connector (FP104) on Drive
P.C.B..
Step 6 Remove the 2 Screws and the Radiator sheet.
Step 7 Remove the Drive P.C.B..
Caution: Though the Drive P.C.B. is not supplied as
replacement parts, it must be removed during disassem-
bling.
Step 8 Open the connector lock, and detach the 45P FFC.
Step 9 Remove the 2 Screws, and remove the Traverse Base
Ass'y with spreading the 2 hooks to the direction of arrows.
68