Panasonic SA-BTT350P Service Manual page 54

Step 3 Lift up the FL P.C.B..
Step 4 Desolder the 4P cable at the connector (CN6001) on FL
P.C.B..
Step 5 Remove FL P.C.B..
• Assembly of FL P.C.B
Step 1 Solder the 4P cable to the connector (CN6001) on FL
P.C.B..
Step 2 Place the FL P.C.B. onto the Front Panel.
Step 3 Dress 22P FFC according to diagram shown.
Caution: Ensure that it is properly located & fully catched.
Step 4 Dress 4P cable into the Front Panel's ribs according to
diagram shown.
Step 5 Fix 5 screws.
54