Table of Contents
Advertisement
Attach Right Side Shelf with Sear Burner
1. Unpack right side shelf with sear burner.
7. Attach the bottom of the side shelf to the side panel (B and C)
2. Open grill lid.
of the grill by inserting the 3 screws removed from the grill
side panel in Step 4. Tighten the screws. See illustration in
3. Remove 3 screws from the side of the searing side burner.
Step 8.
8. Attach the side shelf to the control panel (D) by inserting the
screw removed from the grill control panel in Step 4. Tighten
the screw.
A
B
A. Searing side burner screws
4. Remove the 3 screws on the grill side panel and 1 screw on
the grill control panel.
D
9. Remove the 3 screws from the searing side burner.
C
5.
A. Grill control panel screw
B. Grill side panel screws
Lower the side shelf so that the center post (A) slides into the
bracket (B) and align the bottom keyhole slots on the side
shelf with the screw holes on the grill side panel.
10. Remove the searing side burner.
6.
A
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the bracket to hold the weight of
the sear burner.
Attach the top of the side shelf to the grill (A) by inserting the
3 screws removed in Step 3 into the side shelf from inside the
grill hood and tighten. See illustration in Step 8.
11. Remove the 2 screws from the side burner valve assembly.
See illustration in Step 13.
12. Push the valve stem out through the opening in the front of
the side burner shelf, lining up the holes in the side burner
valve assembly with the openings on the side burner shelf.
See illustration in Step 13.
Advertisement
Table of Contents
