Sanyo W63SA User Manual page 81

Hide thumbs Also See for W63SA:
Table of Contents

Advertisement

Remotely Activating Auto Lock and
AddressBookLock on the W63SA
1
Call your W63SA in the conditions set for Remote
Ctrl Lock.
Remote Ctrl Lock is activated and an announcement to that
effect will be played once the specified number of calls are
received from the registered phone number within the
specified period of time.
Activating the Lock through the Security Lock
Service
Even if you did not set the Remote Ctrl Lock in advance, you can turn on
Auto Lock and AddressBookLock remotely by calling the au Customer
Service Center or performing a specified procedure from PC. This
service is free of charge.
Using the Security Lock Service
Turning Remote Ctrl Lock ON/OFF by calling the au Customer
Service Center
From au cellphones: 113 area code not required (Toll-Free)
From cellphones except au, or regular phones:
(Toll-Free)
Hours: 24 hours a day
Follow the voice guidance instructions.
Turning Remote Ctrl Lock ON/OFF using au Customer Support
(http://cs.kddi.com/)
Login to au Customer Support (http://cs.kddi.com/) and perform the
procedure indicated on-screen.
* It is necessary to apply for this service before using it for the first time.
(You can apply for the service even after you have lost your phone.)
* MyKDDI has been renewed as "au Customer Support" since the
spring of 2008. The procedure remains the same.
Information
Remote Ctrl Lock cannot be activated if your W63SA is not powered on or
in an area with bad reception, or Emission OFF is set to "ON".
"Erase Data" is set to "Not Erase" and "Unlock by Phone" is set to "Invalid"
at the time of purchase.
0077-7-113
79

Advertisement

Table of Contents
loading

Table of Contents