Hyundai HYMT5080 User Manual page 14

4.2. Mounting the trimmer head.
4.2.1. Before mounting the trimmer head you will either have to disassemble the
clamping flange fixings or disassemble the clamping flange fixings and remove
the brush cutter blade.
As in 4.1.1 to 4.1.3 you will need to lock the shaft and remove the nut, cover, clamping
4.2.2. Keep items (4), (5) & (6) in a safe place.
4.2.3. Fit key (2) over shaft (1), then screw trimmer
head(3) onto threaded shaft in a clockwise
direction.
4.3. Using the harness.
4.3.1. Wearing the shoulder harness.
4.3.2. You MUST;
4.3.2.1. Always wear the provided to harness, when you use the machine!
4.3.3. Make sure that the machine is securely hooked onto the strap.
4.3.3.1. If you do not, you will not be able to control the machine safely.
4.3.3.2. This may result in injury to yourself or other people.
4.3.4. NEVER use a harness with a defective quick release or other damage.
4.3.5. Fit harness (a) over shoulders making sure that it is not damaged or twisted.
Connect buckle (b) and adjust to suit. Attach the quick release plate (c)(1) and
flange (blade if fitted) and key piece.
Page 14