Jeep grand cherokee SRT 2015 Owner's Manual page 151

• Press the heated seat button
HIGH setting ON.
• Press the heated seat button
the LOW setting ON.
• Press the heated seat button
the heating elements OFF.
If the HIGH-level setting is selected, the system will
automatically switch to LOW-level after approximately
60 minutes of continuous operation. At that time, the
display will change from HIGH to LOW, indicating the
change. The LOW-level setting will turn OFF automati-
cally after approximately 45 minutes.
NOTE: The engine must be running for the heated seats
to operate.
once to turn the Vehicles Equipped With Remote Start
On models that are equipped with remote start, the
a second time to turn heated seats can be programed to come on during a
remote start.
a third time to turn This feature can be programmed through the Uconnect®
system. Refer to "Uconnect® Settings" in "Understand-
ing Your Instrument Panel" for further information.
Rear Heated Seats — If Equipped
On some models, the two rear outboard seats may be
equipped with heated seats. There are two heated seat
switches that allow the rear passengers to operate the
seats independently. The heated seat switches for each
heater are located on the rear of the center console.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149
3