Table of Contents
Advertisement
Robotic vacuum cleaner
Precautions for safety are the contents to
secure the safety of user and to prevent
damage of property etc. Please read carefully
to have proper use of the product.
※ This product has been made to be used in
Korea, and the quality will not be guaranteed in
overseas countries.
(FOR KOREA UNIT STANDARD ONLY)
Operation manual of the product
VC-RA52V
VC-RA50V* SERIES
VC-RL52V* SERIES
VC-RL50V* SERIES
Advertisement
Table of Contents
Related Manuals for Samsung VC-RA52V
Summary of Contents for Samsung VC-RA52V
- Page 1 Robotic vacuum cleaner Operation manual of the product VC-RA52V Precautions for safety are the contents to VC-RA50V* SERIES secure the safety of user and to prevent damage of property etc. Please read carefully VC-RL52V* SERIES to have proper use of the product.
-
Page 2: Features And Advantages Of Product
Realizing fine and uniform cleaning for every part of the room As the cleaning is conducted by following the lattice pattern ( ) with the ceiling image recognition method, cleaning can be performed for every part of the room. Diverse cleaning mode Various cleaning modes are provided in accordance with the cleaning circumstances. - Page 3 Dual side rotating brush Dust is removed by the rotation of dual side brushes. Threshold traveling Approx. 1 cm of threshold can be traveled with special driving system, therefore, all the rooms can evenly be cleaned. However, for the sake of safety, the threshold of more than 1 cm can not be crossed.
-
Page 4: Table Of Contents
Features and advantages of product ......Preparati o n Precautions for safety ............Items related with the power supply ......... Before the use ................ During the use ................ Handling after the use ............Components ................Name of each section ............Main frame ................ -
Page 5: Preparation
Always observe followings for These are the contents to secure the safety of user and to prevent damage of property. safety Please have safe operation by reading carefully of the following items. This product is used 220V as the rated voltage. If warning items are not being observed, death or serious wound can be occurred to the user. -
Page 6: Before The Use
Always observe followings for These are the contents to secure the safety of user and to prevent damage of property. safety Please have safe operation by reading carefully of the following items. Before the use Confirm whether dust In order to have cleaning of all of the rooms, open the doors of rooms before bin is assembled before the cleaning. - Page 7 In the case of the carpet Before the cleaning or with long tassel at the after establishing the end, fold the end section reserved cleaning to the inside. function, let all the persons in the house to ▶ Fatal damage can be be careful about these inflicted on carpet and by informing them.
- Page 8 Always observe followings for These are the contents to secure the safety of user and to prevent damage of property. safety Please have safe operation by reading carefully of the following items. Before the use When installing the charger, Install the charger at the do not expose the power location where it can be supply cord on the floor.
-
Page 9: During The Use
During the use The robotic vacuum Do not put objects on cleaner shall not be the robotic vacuum used on thick carpet. cleaner. ▶ This can be the cause ▶ Malfunction can be of failure of the robotic generated. vacuum cleaner. ▶... -
Page 10: Handling After The Use
측면 측면 측면 측면 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 회전솔 the first place, and then, Samsung Electronics. 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시 파워브러시... -
Page 11: Components
Carefully confirm the components. Main frame ■ Remote ■ controller Charger ■ preparation (AAA type dry cell) Operating instruction/dry cell Simple instruction Entry prevention tape (1 set) Brush for cleaning Remote controller stand Spare HEPA filter... -
Page 12: Name Of Each Section
Remember the names of each section. ■ Main frame State indicating window Manipulation button Receiving section of remote controller Obstacle sensor Obstacle sensor Bumper sensor Front side preparation Falling prevention sensor Driving wheel Side rotating brush Charging pin Falling prevention Battery cover sensor Power brush... -
Page 13: Charger
Remember the names of each section. ■ Main frame Dust bin discharging button Dust bin Receiving section of remote controller Side section ■ Charger Power lamp (red) preparation Charging lamp (green) Remote controller stand Charging terminal Ventilation port Catching sill... -
Page 14: Remote Controller
Remember the names of each section. ■ Remote controller preparation VC-RA52V VC-RA50V * SERIES VC-RL52V * SERIES VC-RL50V * SERIES The method to put in dry cell When purchasing the product, the dry cell is not existed at the remote controller inside. -
Page 15: State Indicating Screen
Remember the names of each section. ■ State indicating window ⓐ ⓑ ⓒ ⓓ preparation 6. Cleaning mode indicating section Indicating section - Whenever pressing the cleaning mode button, 1. Numeral indicating section the cleaning mode will be appeared in - Expressing reserved time indication, sequence. -
Page 16: Installation
Confirm at the time of Perform the installation in accordance with the following installation. sequence. ■ Installation sequence Emergency switch ON/OFF In order to use the robot vacuum cleaner, the emergency switch located underneath of the main frame shall be turned on. Installing the charger In order to have charging, install the charger in the first place. -
Page 17: Installation Of The Charger
■ Installation of charger Power supply lamp Charging lamp Install the charger at the location where the floor and wall are even. Install the charger at the location where there are no obstacles around approx. 1m in front of and 0.5 m to the left and right side of the charger. -
Page 18: Electric Charging
Remember the installation Observe the following sequence before inserting the power method. supply plug of charger. ■ Perform the charging Power supply Charging When purchasing the product, the 전원램프 lamp lamp 충전램프 battery is in the discharged state, therefore, it shall manually be charged at the initial stage. -
Page 19: Important Items For Battery
( and model name before the purchasing. ▶ As this battery is exclusively used by the robotic vacuum cleaner of Samsung Electronics, do not use it to other electric home appliance or application. ▶ Do not conduct disassembly or modification. -
Page 20: Installation Of Entry Prevention Tape
Get to know about installation method. ■ Installation of entry prevention tape Always attach entry prevention tape at no-entry area of the robot vacuum cleaner. ■ Remove the vinyl tape before attaching it. Attach the entry prevention tape at the area which has less than 5 cm of height difference with the floor. -
Page 21: Cleaning Start/Stop
Get to know about operation method. ■ Cleaning START/STOP All functions of the robotic vacuum cleaner can be started or stopped. ■ All functions of the robotic vacuum cleaner can be activated when the emergency switch is turned on. ■ When the robotic vacuum cleaner is in operation, select the desired function after canceling the operation by pressing the button. -
Page 22: Returning To Electric Charging
Get to know about operation Returning for charging method. ■ Returning for charging The robotic vacuum cleaner can be returned to charger for charging by the charging return button. ■ When the charging return button is in operation, select the charging return button after cancel the operation by pressing the button. -
Page 23: Automatic Cleaning
Get to know about operation Automatic cleaning method. ■ Using of automatic cleaning Automatic cleaning will be conducted while moving by itself until 1 cycle of the cleaning is completed. ■ When starting the cleaning from the attached state to the charger, the movement is performed while the starting point is being remembered, therefore, the charging return time will be shortened. -
Page 24: Partial Cleaning
Get to know about operation Partial cleaning method. ■ Using of partial cleaning When small fragments of cake et cetera are being fallen, these can be cleaned easily. ■ Move the robotic vacuum cleaner to the place where partial cleaning is required. Main frame button Remote controller Sequence of setting... -
Page 25: Repeated Cleaning
Get to know about operation Repeated cleaning method. ■ Using of repeated cleaning Even under the state of completion of cleaning, repeated cleaning will be performed until one column of battery is started to be flickering. ■ When starting the cleaning from the attached state to the charger, the movement is performed while the starting point is being remembered, therefore, the charging return time will be shortened. -
Page 26: Manual Cleaning
Get to know about operation Manual cleaning method. ■ Using of manual cleaning Cleaning can be performed while directly moving the robotic vacuum cleaner with the remote controller. ■ Move the robotic vacuum cleaner to the place where manual cleaning is required. ■... -
Page 27: Reserved Cleaning
Get to know about operation Reserved cleaning method. ■ Setting of reserved cleaning Even in absentia, automatic cleaning will be performed at desired time. (available time of reservation: 23 hours to the maximum) ■ The reserved cleaning will be performed only when the cleaner is attached to the charger. -
Page 28: Additional Functions
More simple and convenient use of the robotic vacuum cleaner will be accomplished by utilizing various additional functions. ■ Additional functions can only be setup with the remote controller. Selection of voice (exclusive use for VC-RA52V,VC-RL52V* SERIES) Select desired voice guide by pressing the voice selecting button. ▶... -
Page 29: Precautions Before The Handling
Get to know about cleaning and Perform regular cleaning. handling method. Always observe the following items. ■ Precautions before the handling ▶ In the case when the emergency switch is damaged, call to the customer care center so as not to have danger. ▶... -
Page 30: Handling Of Dust Bin And Hepa-Filter
Get to know about cleaning and Regularly empty dust bin and take care of the HEPA filter. handling method. Always observe the following items. ■ Handling method of dust bin and HEPA filter When starting the cleaning, empty the dust bin in HEPA filter the first place. -
Page 31: Handling Of Power Brush
When being blocked by foreign material, When suction force of the robotic vacuum cleaner is weakened or trembling remove it as follows. noise is generated, the cleaner may have been blocked by foreign material. ■ Handling method of power brush Always turn off the emergency switch at the bottom of main frame before handling. -
Page 32: Handling Of Side Rotating Brush
If side rotating brush becomes bent or dirty, When the bottom surface to be cleaned is rough or frequent wall surface take the following measures. cleaning is conducted, the side rotating brush can be bent or scattered. ■ Handling method of side rotating brush Always turn off the emergency switch at the bottom of main frame before handling. -
Page 33: Handling Of Driving Wheel
If foreign material is caught in the driving wheel, take If the inspection code of 002, 003 are appeared on the main frame the following measures. state indicating screen, take actions as follows. ■ Handling method of driving wheel Always turn off the emergency switch at the bottom of main frame before handling. -
Page 34: Corrective Measures For Each Inspection Code
Always confirm these before If service is requested when it is not a case of failure, the service charge reporting the failure. will be requested, therefore, read the operation manual carefully. Symptom Confirmation Corrective measures The robotic vacuum ▶ Has the dust bin been assembled? ▶... - Page 35 If service is requested when it is not a case of Always confirm these before failure, the service charge will be requested, reporting the failure. therefore, read the operation manual carefully. Symptom Confirmation Corrective measures The robotic vacuum ▶ Confirm whether the power supply plug of the charger has cleaner can’t find the been inserted to the outlet.
- Page 36 ※ When pressing activation/stop button or turning off the emergency switch, the inspection code will be released. ※ When inspection code is generated, voice guide will be presented (exclusive use for VC-RA52V,VC-RL52V* SERIES)
-
Page 37: Specification Of Product
93 mm(Height) 355 mm(Length) 355 mm(Width) Main frame others 122 mm(Height) 275 mm(Width) 161 mm(Length) Charger... - Page 38 ■ Product specification VC-RA50V * SERIES VC-RA52V Classification Item VC-RL52V * SERIES VC-RL50V * SERIES Diameter 355mm 355mm Mechanical Height 93mm 93mm specification Weight 4.0kg 4.0kg Single phase AC220V/60Hz Single phase AC220V/60Hz Power supply voltage Power consumpti o n for chargi n g...
-
Page 39: Disposal Guidance Of Waster Electronic Product
‘environmental policy’ for continuous improvement, they declared the [green management] in May, 1996. The green management of Samsung Electronics is the expression of the will to participate for the embodiment of affluent living of human and global environmental preservation by recognizing the environment, safety, and health as the core elements of enterprise management activity and through the active promotion of this. - Page 40 Memo...
- Page 41 Memo...
- Page 42 Memo...
- Page 43 - Initial installation of the delivered product - When failure is occurred through the repair by the person who is not the technician of Samsung ※ When installed by service after the purchasing, the service Electronics Service Inc. which is the entrusted service company of Samsung Electronics Inc. and charge will be requested.
- Page 44 The cyber service center, in which reception of service and real time cyber consultation at the date and time exactly desired by customer can be realized, is operated. Customer consultation office Internet home page http://www.sec.co.kr 02-541-3000, 080-022-3000 Address: 271 Oseon dong, Gwangsan gu, Gwangju metropolitan city ■ Manufacturer: Samsung Gwangju Electronics Inc. ■ DJ68-00517B REV(0.6)