Samsung VC-RA52V Operation Manual page 36

Get to know about corrective measures for
inspection code
others
※ When pressing
code will be released.
※ When inspection code is generated, voice guide will be presented (exclusive use for
VC-RA52V,VC-RL52V* SERIES)
36
If service is requested when it is not a case of failure, the service charge
will be requested, therefore, read the operation manual carefully.
each inspection code.
Cause
▶ Probl e m such as j a mmi n g, catchi n g, l o cki n g and
so forth are occurred duri n g the travel i n g of the
roboti c vacuum cl e aner.
▶ Foreign materials (thread,
paper, toy, etc.) are caught to
the power brush.
▶ Foreign materials (thread,
paper, toy, etc.) are caught to
the left side driving wheel.
▶ Foreign materials (thread,
paper, toy, etc.) are caught to
the right side driving wheel.
▶ Inspection of bumper
sensor is required.
▶ Foreign materials (dust, stain,
etc.) are accumulated on the
obstacle sensor window.
▶ Foreign materials (dust, stain, etc.)
are accumulated on the falling
prevention sensor window.
▶ Insertion of dust bin is
impossible.
▶ Foreign materials (thread,
cloth, etc.) are caught to
the side rotating brush.
activation/stop button or turning off the emergency switch, the inspection
Corrective measures
▶ After turned off the emergency switch at the
bottom side, move the robotic vacuum cleaner
to other place.
▶ After turned off the emergency switch
at the bottom side, remove foreign
material caught in the power brush.
▶ After turned off the emergency switch at
the bottom side, remove foreign material
caught in the left side driving
▶ After turned off the emergency switch at
the bottom side, remove foreign material
caught in the right side driving wheel.
▶ Gently pull the pressed bumper to the outside.
▶ After turned off the emergency switch at the
bottom side, wipe the foreign materials
accumulated on the front and rear sensor
windows with smooth cloth.
▶ After turned off the emergency switch at the
bottom side, wipe the foreign materials
accumulated on the falling prevention sensor
window with smooth cloth.
▶ Insert the dust bin assembled with filter
until "click" sound is generated.
▶ After turned off the emergency switch at the
bottom side, remove foreign material from the
side rotating brush.
31
33
wheel.
33
29
29
30
32