NAPCO Gemini GEM-X255 Operating Manual page 24

Programming Zone Descriptions
The zone descriptions which appear on the keypad display may be programmed in the User Program Mode.
A C T I V A T E
P R O G R A M
0 0 1 - F R O N T D O O R
24
P R O G R A M M I N G ( O P T I O N A L )
Enter the User Program Mode
1
Enter your User Code, then press
Y / N
2
Answer NO (press
then press YES
(
E
Entering a new zone description
Use buttons
Use buttons
marks and a variety of symbols.
Use the above buttons to enter each character of the description and then press
D
to save when the zone description is complete.
To advance to the next zone (or to any other zone):
Move the cursor to the displayed zone number (i.e., "01") using
Change the zone number using
first character of the description and program a description for the new zone.
Always press
) until "ACTIVATE PROGRAM Y/N" is displayed ,
F
( ). "ENTER USER CODE" will display, press NEXT
E
) and the keypad will display the Zone 1 Description.
1 and 2 to position the cursor within the display.
3 and 6 to scroll through numbers, letters, punctuation
3
D
to save each zone description.
to enter the Function Mode.
A
1
and , then move the cursor to the
6
and .
2