Descaling The Appliance - Bosch TCA6001 Operating Instructions Manual

Tca 60 series
Hide thumbs Also See for TCA6001:
Table of Contents

Advertisement

Descaling the appliance

If the illuminated ring on the descaling button
4 9 is lit red and
on display 3 when the appliance is switched
on, the appliance must be descaled
immediately. If the appliance is not descaled
as instructed, it may be damaged.
Warning
Never descale the appliance with vinegar
or vinegar based agents!
Do not use cleaning tablets.
Never interrupt the descaling programme!
Do not drink liquid!
A descaling agent is enclosed with the ap
i
pliance. Specially developed and suitable
agents are available from customer ser
vice (order no.: 31 0451).
While the descaling programme is running
i
approx. 35 minutes processes and in
structions are indicated on display 3.
The specified times may differ.
The illuminated ring on the descaling but
i
ton 4 9 flashes during the descaling
programme.
Starting the descaling programme
q Hold down the descaling button
4 9 for at least 3 seconds.
h
If
flashes occasionally on display 3,
see Eliminating minor faults yourself".
q Empty and re insert tray 24 and coffee
dregs tray 23.
q Fill water tank 22 with water and add de
scaling agent total volume of liquid 0.5
litres.
or
q Pour ready prepared descaling mixture
into the water tank 22 total volume of
liquid 0.5 litres.
q Place an appropriately large receptacle
under nozzle 13.
k
is indicated
q Set function selector 2 to 0.
Note: The appliance is automatically
descaled, 3 lights up
Descaling solution flows at intervals into the
receptacle. Wait for the next symbol
on display 3 (approx. 10 minutes).
q Set function selector 2 to
Note:The appliance is automatically descaled,
a
lights up on display 3. Descaling solution
flows at intervals into the tray 24. Wait for the
f
next symbol
on display 3 (approx. 10
minutes).
q Empty and re insert tray 24 and coffee
dregs tray 23.
q Rinse out the water tank 22, fill with fresh
water up to max and re nsert.
q Empty the receptacle and place back un
der the nozzle 13.
q Set function selector 2 to 0.
Note: The appliance is automatically
a
descaled,
lights up on display 3.
Water flows at intervals into the receptacle.
Wait for the next symbol
display 3 (approx. 4 minutes).
q Set function selector 2 to
Note: The appliance is automatically
a
descaled,
lights up on display 3.
Water flows at intervals into the tray 24.
Wait for the next symbol
3 (approx. 4 minutes).
q Empty tray 24 and coffee dregs tray 23.
q Clean and dry contacts 26.
q Re insert tray 24 and coffee dregs tray 23.
Note: The appliance is automatically rinsed.
q Wipe splashes off the nozzle 13 and ap
pliance.
The descaling process is complete.
i
The illuminated ring on descaling button
4 9 goes out.
The appliance is ready for use again.
a
on display.
g
z
.
g
on
z
.
f
on display
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents